|
 For gain, loss or continuous weighing applications
Product Overview
Metalfab “Better-Weigh®” Feeder Controls are available with a “Gain in Weight” mode for applications where a product is being fed into a scale system such as a container sitting on a floor/bench scale or weigh hopper on load cells. In this mode, the controller can verify the zero setting between weighments, auto-tare the weight of a container, verify the container is in position by referencing the container weight setting, or a band value plus or minus to confirm an empty container is in place prior to start of feeding.
A “Loss-in-Weight” mode can be provided for applications where the feeding device is on load cells or a scale system of some type. This mode is used when one or more products need to feed into a process simultaneously, allowing all feeders to dispense product at the same time.
A “Continuous Weighing” mode is provided to continually feed product at a preset rate on a per-second, per-minute, or per-hour basis. Refilling of the feeder can be automatic through input of minimum and maximum weight values to the controller.
|
